Skip to content
A framed TV showing art on a gray-green wall

Your exact price by text, no visit needed

TV mounting in Benson, North Carolina

Benson grew up after 1886, when a new railroad line crossed land owned mostly by Alfred Monroe Benson, and fires in 1902 and 1903 led its merchants to rebuild Main Street in brick. Around that downtown stand one-story frame houses from the early 1900s and newer subdivisions, while manufactured homes are common across the farmland of southern Johnston County. Manufactured-home panels, plaster, wood and drywall carry no wall charge, brick adds $59, and labor runs $69 to $210 by screen size.

  • $69 Up to 31 inches
  • $129 32 to 59 inches
  • $165 60 inches and up, you help lift

“He came on time, very professional and never made a move without asking me or incorporating me.” Helen T., on Google

More than 10,000 TVs mounted in five years, with the labor guaranteed for a year. Your exact price comes by text before anyone visits.

Your price, step by step

Step 1 of 617%
How big is the TV?
One TV.

Rather text? Send a photo of the wall to (404) 448-1471

Get your TV on the wall in Benson

Text a photo of the wall, call, or send the form. We reply with your price and the first open time.

Helps us match you with the installer closest to you.

By providing a telephone number and submitting the form, you are consenting to be contacted by SMS text message and agreeing to our Privacy Policy. Message frequency may vary. Message and data rates may apply. Reply STOP to opt out of further messaging. Reply HELP for more information.

The price, before you book

Labor by screen size, the same in Benson as everywhere we work. The mount, the wall and the wires are separate lines, each shown in the steps above.

Labor per TV

Up to 31″
$69
32″ to 59″
$129
60″ and up, you help lift
$165
60″ and up, two technicians
$210

Mounts, walls, wires and extras are on the price list.

Rated 5.0 on Google from 830+ reviews

Three of them, word for word.

Stan was incredible. He mounted both of my TVs perfectly and made sure everything was secure, level, and clean. On top of doing excellent work, he was so helpful and kind throughout the entire process. He turned something that could’ve been stressful into a smooth, awesome experience. I’m truly grateful for his professionalism and great energy. I’d absolutely recommend this company if you want to mount your TVs. Thank you for your help.

April S.

Google review

Stan did an amazing job. I sent a text for for a quote around 12:26. Stan was here at 130pm and was done by 2pm. This is the best customer service I've ever had! 20 stars if I could.

D Allen

Google review

D Allen
I had an excellent experience from start to finish. He came to mount my TV and was extremely professional, punctual, and well-prepared. He arrived on time with all the necessary tools and made the entire process smooth and stress-free. …

Linndjeni P.

Google review

Linndjeni P.

Triple-A houses, new subdivisions and farm-lot homes

Benson was a farm-trade town from the start, buying cotton and produce, and in the days when fields were worked with mules, Benson and Clayton were two of the area's main mule markets. Every September, Benson Mule Days still fills the streets. The most common old house in the historic district is the Triple-A, a one-story frame house whose roof shows three gables from the street, usually with a porch across the front, and most were built between about 1900 and 1925. On Main, Church and Hill streets, merchants and cotton buyers built larger Colonial and Neoclassical Revival houses, some with plastered rooms and handsome mantels. Plaster and wood mount at the drywall price, and a TV over any of those mantels takes the $49 fireplace line, with $59 more if brick covers the wall above.

A large share of Benson's homes are much newer, built since 2000 in subdivisions where the walls are drywall over wood studs. The wall adds nothing there, and cables can run inside it to a new outlet behind the TV for $99, or $149 above a fireplace. Two TVs mounted in one visit take 20% off the whole order, and three or more take 30%.

Out on the farm lots around Benson, manufactured homes are common, single-wide and double-wide alike. They're built in a factory, framed and paneled before they're towed to the lot, and their wall panels are usually thinner than the drywall in a site-built house. The panel is priced like drywall, so it adds nothing. Behind it, though, the studs do the work: the mount has to go into them, and the section below covers what that means for the cords.

Thin panels, solid studs

Manufactured-home panels cost the same as drywall. The mount is bolted into the studs, never the panel alone.

Triple-A houses

These one-story frame houses from about 1900 to 1925 mount on plaster or boards at no extra charge.

Mantels near Main Street

A TV above an old mantel adds $49. Brick over the shelf adds another $59 for masonry anchors.

New subdivisions

Drywall over wood studs takes in-wall cables, with an outlet behind the screen, for $99.

A customer beside a TV mounted on a living room wall above a wood credenza
TV and soundbar mounted on a plain wall above a subwoofer on the floor

Benson numbers for a farm-lot home, a Triple-A and a new build

In a manufactured home, a 55-inch TV on a fixed mount with its cords in a paintable cover comes to $227, and a 32-inch bedroom TV on a fixed mount with the cords showing is $178. A 24-inch TV for a kitchen or a small bedroom, fixed mount and cords showing, is $118. In a Triple-A house with plaster walls, a 55-inch TV on a tilting mount with the cords in view is $188.

Above a brick-faced mantel in one of the bigger houses near Main Street, a 65-inch TV on a tilting mount with the cords showing is $332 when you help lift. In a newer subdivision house, a 65-inch TV on a fixed mount with a soundbar under it and every wire inside the wall is $392. Three 55-inch TVs on tilting mounts on one order, cords showing, drop from $564 to $395 with the 30% discount. The prices page has every line.

A wall of mounted TVs above a long run of white cabinets

Hanging a TV in a manufactured home

Start with the studs. The wall panels in a manufactured home are thin, and many, older homes especially, have a printed vinyl face with narrow strips over the seams. A panel alone shouldn't carry a TV, so the mount is bolted into the studs behind it. The technician finds them before marking anything, then levels the mount and load-tests it before the TV goes on.

Then plan the cords. A vinyl face can't be patched and painted out the way plain drywall can, so any opening cut for in-wall cables stays visible if the TV ever moves. In-wall wiring is still possible at $99, with an outlet behind the TV, and an interior wall is the easier place for it, since outside walls are packed with insulation. A $49 paintable cover running down to the outlet keeps the panel uncut. Single-wide or double-wide, a photo of the wall taken from across the room, plus the screen size, lets us price the job before the visit. The cover and the in-wall route are compared on the wire concealment page.

Recent jobs

Photos from recent TV Mount Lux jobs.

What happens next

1. Pick your setup

Tap the size, mount, wall and wires at the top of this page. Each answer shows its price.

2. Get the total by text

Leave your number for the exact total and the first open time.

3. We mount it

The height is marked with you, then the TV goes up level, with the wires done your way.

4. Guaranteed for a year

Load-tested before the technician leaves, with the labor guaranteed for 12 months.

Benson questions, Main Street to the farm lots

Manufactured homes, old mantels and new drywall.

Can a TV be mounted on the wall of a manufactured home near Benson?

Yes. The panels are priced like drywall, so the wall adds nothing, and the mount goes into the studs, not the panel. A vinyl face is hard to patch, so the cords usually ride in a $49 paintable cover, and a 55-inch TV on a fixed mount set up that way is $227.

Do the plaster walls in an old Triple-A house in Benson cost extra?

No. Plaster and wood boards share the drywall line, so the total depends on the screen size, the mount and the cables. The technician finds the framing behind the plaster before marking the mount. If you want the cables inside the wall, a photo of it comes first.

We're in one of Benson's newer subdivisions. What does hiding every wire cost?

On a plain drywall wall, the in-wall line is $99 and adds a power outlet behind the TV, so a 55-inch TV on a tilting mount wired that way is $287. Above a gas fireplace the same line is $149, and a 65-inch TV on a tilting mount there comes to $422 with your help lifting.

Do homes out on the country roads around Benson pay the same as homes in town?

Yes. One price list covers every area we serve, from Main Street to a farm lot, and it's the one used in Smithfield too. Availability depends on the day's schedule. Calls and texts to (404) 448-1471 are answered from 8 AM to 8 PM, seven days a week.

Text a photo Call (404) 448-1471

Text a photo of your wall

Point your phone's camera here to start a text to (404) 448-1471. Add a photo of the wall and your TV's size, and we reply with your price.

QR code that starts a text message to (404) 448-1471
Use the request form instead