TV mounting above a fireplace
The wall over the mantel is the obvious spot for the TV in a lot of living rooms, and the hardest one to get right. Height, heat, the material behind the paint and the route for the cables all change from house to house. Mounting above a fireplace adds $49 to the price for your TV's size, and everything else on the job is a line from the same price list.
Your price, step by step
Request a time
By providing a telephone number and submitting the form, you are consenting to be contacted by SMS text message and agreeing to our Privacy Policy. Message frequency may vary. Message and data rates may apply. Reply STOP to opt out of further messaging. Reply HELP for more information.
What changes when the TV goes over the mantel
A TV above a fireplace sits higher than one on an ordinary wall, because the mantel sets the lowest point it can go. That's why most fireplace installs use a tilting mount: it angles the screen down toward the couch so you aren't looking up at the picture. A full-motion mount works too, and helps when the seating isn't straight in front of the fireplace.
The wall itself is the second question. Many fireplace walls are drywall over wood framing, which takes a mount the same way any interior wall does. Others are brick, stacked stone or a tiled surround, and those need a hammer drill and masonry anchors, which is the $59 hard-wall line on the price list. A photo of the fireplace from across the room usually tells us which one you have.
Then there are the cables. Above a fireplace, running them inside the wall means working around the firebox, the framing over it and sometimes a chimney chase, so in-wall routing there is its own line: $149 with a power outlet behind the TV, compared with $99 on a regular wall. If you'd rather not open the wall, a paintable cover from the TV down to the outlet is $49.
Put together, a 65-inch TV on a tilting mount above a drywall fireplace, wires showing, comes to $273. Hide the wires in that wall and it's $422. If the surround is brick, the same TV with the wires showing is $332.
Height marked with you
The technician marks the height on the wall with you before anything is drilled, so the screen ends up where you'll actually watch it.
Tilting or full motion
A tilting mount is $59 and angles the screen down. Full motion is $79 and swings toward seats off to the side.
Brick and stone anchors
Masonry surrounds take a hammer drill and anchors made for them, at $59 per TV.
Wires in the wall or in a cover
In the wall above a fireplace with a power outlet behind the TV is $149. A paintable cover is $49.
How high should the TV go?
For an ordinary wall, a common rule is to put the middle of the screen near eye level when you're seated, which for most couches is somewhere around 40 to 45 inches off the floor. Above a fireplace you can't get that low, because the mantel is in the way. The goal becomes the lowest height the mantel and the heat allow.
In practice that means measuring the mantel, checking how far the TV and mount stick out from the wall, and leaving a gap between the bottom of the TV and the mantel shelf. A tilting mount then brings the angle back toward the room. If you have a measurement in mind, say so when you book, and we'll mark it on the wall before drilling so you can see it first.
Heat: check before you commit
A fireplace that gets real use sends warm air up the face of the wall. TV makers set their own limits for heat, and they vary by model, so check your TV's manual. A simple test helps too: with the fire going for a while, hold your hand flat on the wall where the TV would hang. If that's too hot to keep your hand there, the TV shouldn't go there either.
A deep mantel shelf moves heat away from the wall above it, and gas inserts often run cooler on the face than an open wood fire. If the fireplace is decorative and never lit, heat isn't a concern at all. Tell us how you use the fireplace when you book.
Hiding the cables above a fireplace
In-wall cable routing above a fireplace is a different job from the same work on a plain wall. The space above the firebox often has extra framing, and some fireplaces sit inside a chimney chase or against masonry. That's why the menu prices it separately: $149 for the cables inside the wall with a power outlet behind the TV, against $99 on a regular wall.
When opening the wall isn't practical, a paintable cord cover runs from the TV down the side of the fireplace to the outlet for $49. On brick or stone, a cover is often the cleaner choice. Send a photo and we'll tell you which one your wall allows. Our wire concealment page covers both options in more detail.
Questions about mounting above a fireplace
Price, safety, height and wires.
How much does it cost to mount a TV above a fireplace?
Start with the price for your TV size ($69 up to 31 inches, $129 for 32 to 59 inches, $165 for 60 inches and up with your help lifting, or $210 with two technicians), add $49 for mounting above the fireplace, then the mount you need and any wire work. A 65-inch TV on a tilting mount above a drywall fireplace, wires showing, is $273.
Is it safe to put a TV above a fireplace I use?
Which mount is best above a fireplace?
Usually a tilting mount ($59), because it angles the screen down from the higher position. A full-motion mount ($79) suits rooms where the seats are off to one side. If you already have a mount, we install it at no extra charge.
Can you hide the wires above a fireplace?
Yes. Inside the wall with a power outlet behind the TV is $149 above a fireplace. A paintable cover on the wall is $49 and is often the better option on brick or stone.
Can you mount a TV on a stone or brick fireplace?
Send a photo of your fireplace
A straight-on photo from across the room shows us the surround, the mantel and the outlets. Text it to (404) 448-1471 with your TV size, and we reply with the total.