Skip to content

Brick and stone TV mounting

Brick, concrete and stone make a solid backing for a TV, but none of them will take the wood screws that hold a mount to drywall studs. The hard-wall line is $59 per TV, added to your TV's size price, and it pays for the hammer drill work and the masonry anchors. Your mount and any wire work cost exactly what they would on drywall.

TV mounted on a white stacked-stone fireplace above a wood mantel

Your price, step by step

Step 1 of 617%
How big is the TV?
One TV.

Request a time

Helps us match you with the installer closest to you.

By providing a telephone number and submitting the form, you are consenting to be contacted by SMS text message and agreeing to our Privacy Policy. Message frequency may vary. Message and data rates may apply. Reply STOP to opt out of further messaging. Reply HELP for more information.

How a TV mount holds on masonry

On drywall, a mount is bolted through the wallboard into the wood studs behind it. Brick and concrete have no studs to find. The technician drills straight into the masonry with a hammer drill, a tool that strikes the bit forward in quick blows while it turns, and fastens the mount with anchors made for masonry.

That works in your favor on placement. With no framing to line up with, the mount can be centered on a wall or on the face of a fireplace wherever the masonry is sound, instead of shifting a few inches to catch a stud. What the anchors do need is solid material around them, so point out crumbling mortar, cracked brick or a loose stone when you book.

The bill adds up the same way as any other install: the size price, $59 for the hard wall, then whichever mount and wire work you want. Picture a full-motion mount on brick holding a 65-inch TV, wires left showing: $165 for the size, $79 for full motion and $59 because the wall is brick, for a total of $303. Swap in a tilting mount and hang that TV over a brick fireplace instead, and it comes to $332, since mounting over a fireplace is a $49 line of its own. Both figures use the one-technician price, with your help lifting; two technicians add $45.

Hard walls turn up in every area we serve. Older bungalows and mid-century ranches often have brick fireplaces, the condo towers along Peachtree Road in Buckhead often have concrete walls and columns, and many newer houses wrap the fireplace in stacked stone. Sometimes the wall is the building itself: exposed brick in Durham lofts made from old tobacco factories and mills, in the 1920s apartment blocks of Seattle's Capitol Hill, or in the solid brick houses of the Avenues in Salt Lake City.

Hammer drill and masonry bits

An ordinary drill struggles in brick, block and poured concrete. A hammer drill with a masonry bit doesn't.

Anchors matched to the wall

Solid brick, hollow block and concrete each take anchors suited to them, covered by the $59 hard-wall line.

A photo for stacked stone

Uneven stone is easier to plan from a picture, so text one before you book.

Cables in a paintable cover

Where there's no hollow space for wires, they run in a $49 paintable channel on the face of the wall.

Brick, block, poured concrete or stacked stone?

All four count as hard walls on the price list, but each one holds a mount a little differently. Solid brick is dense and grips an anchor well, though old brick and its mortar can turn soft or crumbly, so the surface is worth a look first. Concrete block, common in basements and some exterior walls, is hollow inside. An anchor in block has to hold in a thin shell of concrete, which calls for a type made for hollow masonry.

Poured concrete is slow to drill and holds an anchor firmly once it's set. It shows up in high-rise buildings and in some basements. Stacked stone around a fireplace is often a veneer with an uneven face, some stones standing out farther than others, and a mount needs to sit flat. That's where a photo first helps most: one shot straight on and one from the side show how far the stones project and where a mount could sit.

Concrete walls in high-rises and lofts

In a high-rise condo, the wall that faces the couch is often poured concrete, or a concrete column stands right where the TV would go. Loft conversions have their own version: exposed brick that may be a hundred years old. A column or a narrow strip of wall between windows limits how wide a wall plate can be, so measure the space and send the measurement with the TV size.

High-rise buildings tend to have rules of their own. Management offices often want contractors on the calendar ahead of time, and some reserve the service elevator for them or keep noisy work like drilling to set hours. Find out what your building asks for before you pick a time, and mention it when you book, so we can schedule around it.

Getting the cables down a masonry wall

Behind drywall there's a hollow space between the studs, and that space is what makes in-wall cable runs possible, ending at an outlet set behind the screen. Solid brick and poured concrete have no such space, so the in-wall option usually isn't available on them. The practical answer is a paintable cover: a slim channel running from below the screen to the outlet, $49, which you can paint to match the wall.

Fireplaces deserve a second look. Many have brick or stone only around the firebox and drywall above the mantel, and a TV mounted on that drywall carries no hard-wall charge. Cables can often go inside that stretch of drywall too, on the $149 above-fireplace line that puts a power outlet behind the TV. The fireplace mounting page covers that setup, and wire concealment compares the cover with the in-wall route.

Brick and stone mounting questions

Price, anchors, condos and fireplaces.

What does brick add to the cost of mounting a TV?

Brick costs $59 more per TV than drywall, plaster or wood. The mount and any wire work are separate lines that cost the same on either wall. For example, $303 pays for mounting a 65-inch TV on brick with a full-motion mount, cables left showing.

Do you drill into the brick or the mortar?

It depends on the wall, and on how the holes in the mount's wall plate line up with the rows of brick. Sound brick usually gives an anchor the firmer hold, while mortar is easier to fill if the TV ever moves. The spot gets picked with you, before any drilling.

Is a concrete wall in a condo priced like brick?

Yes. Brick, concrete block, poured concrete and stone all fall under the one $59 hard-wall line. Ask the management office what it requires of contractors before you book.

My fireplace has brick only around the firebox. Is that a hard wall?

Only if the TV mounts on the brick. Plenty of fireplaces have drywall above the mantel, and a TV on that drywall has no hard-wall charge. A photo of the whole fireplace, floor to ceiling, settles it.

Do I need a special mount for masonry?

No. The fixed, tilting and full-motion mounts on the menu ($49, $59 and $79) all work on brick and concrete, and a mount you already own costs nothing extra to put up. On a hard wall, the drill and the anchors change, not the mount.

Which hard wall do you have?

Text (404) 448-1471 two photos, one of the whole wall and a close-up of its surface, plus your TV size. We reply with the wall type we see and the total for your setup.

Text a photo Call (404) 448-1471

Text a photo of your wall

Point your phone's camera here to start a text to (404) 448-1471. Add a photo of the wall and your TV's size, and we reply with your price.

QR code that starts a text message to (404) 448-1471
Use the request form instead