Skip to content
A wall of mounted TVs above a long run of white cabinets

Your exact price by text, no visit needed

TV mounting in Ocoee

Ocoee began as a settlement on Starke Lake, with its old downtown just west of the water, but most of the city came later, in subdivisions built once State Road 50 and then the expressways reached it. Many of those houses have no masonry fireplace, so the TV wall is often one the owner adds: a framed bump-out around an electric fireplace, or an accent wall of shiplap, wood slats or stone veneer. A framed wall adds nothing, a stone or tile face adds $59, and labor runs $69 to $210 by screen size.

  • $69 Up to 31 inches
  • $129 32 to 59 inches
  • $165 60 inches and up, you help lift

“He came on time, very professional and never made a move without asking me or incorporating me.” Helen T., on Google

More than 10,000 TVs mounted in five years, with the labor guaranteed for a year. Your exact price comes by text before anyone visits.

Your price, step by step

Step 1 of 617%
How big is the TV?
One TV.

Rather text? Send a photo of the wall to (404) 448-1471

Get your TV on the wall in Ocoee

Text a photo of the wall, call, or send the form. We reply with your price and the first open time.

Helps us match you with the installer closest to you.

By providing a telephone number and submitting the form, you are consenting to be contacted by SMS text message and agreeing to our Privacy Policy. Message frequency may vary. Message and data rates may apply. Reply STOP to opt out of further messaging. Reply HELP for more information.

The price, before you book

Labor by screen size, the same in Ocoee as everywhere we work. The mount, the wall and the wires are separate lines, each shown in the steps above.

Labor per TV

Up to 31″
$69
32″ to 59″
$129
60″ and up, you help lift
$165
60″ and up, two technicians
$210

Mounts, walls, wires and extras are on the price list.

Rated 5.0 on Google from 830+ reviews

Three of them, word for word.

Stan did an amazing job. I sent a text for for a quote around 12:26. Stan was here at 130pm and was done by 2pm. This is the best customer service I've ever had! 20 stars if I could.

D Allen

Google review

D Allen
I had an excellent experience from start to finish. He came to mount my TV and was extremely professional, punctual, and well-prepared. He arrived on time with all the necessary tools and made the entire process smooth and stress-free. …

Linndjeni P.

Google review

Linndjeni P.
If you want someone who prioritizes a clean, wire-free finish and technical precision, Stan is your guy. He delivered a sophisticated result that is ready for my office upgrade. Highly recommended for anyone looking for a polished, professional install.

Dominique N.

Google review

Dominique N.

Bump-outs and accent walls in Ocoee living rooms

Away from the older streets around downtown and Bluford Avenue, most Ocoee houses date from the 1980s on, built of concrete block with stucco outside and drywall inside. In a climate this mild a fireplace was never a given, and many family rooms were finished without one. A common answer is to build the TV wall: a bump-out framed in front of the original wall with an electric fireplace set into it, or an accent wall faced in shiplap, wood slats or stone veneer. How that wall was built decides how the mount goes up.

A bump-out is a box of studs, usually wood two-by-fours and sometimes light steel, covered in drywall. Its studs stand where the builder needed them, at the corners, beside the fireplace opening and around any niches, so they seldom keep the even 16-inch spacing of an ordinary wall. A header, a horizontal piece of framing, bridges the top of the fireplace opening. The mount has to bolt into that framing, or into wood backing added for the TV, and finding it comes before any mark goes on the wall. Light steel studs won't hold a lag bolt, so anchors made for steel framing go in instead.

The face comes next. Shiplap, wood slats and plain drywall all count as drywall or wood on the price list and add nothing, though boards over drywall thicken the wall, so the lag bolts must pass through them and still reach well into a stud. Stone veneer and tile are hard walls, the $59 line. Behind the bump-out stands the house's own wall, often the outside concrete block. When the mount bolts to the bump-out's framing rather than to that block, the block adds nothing by itself.

Then there's the fireplace. Its installation manual gives the space it needs above it, and the TV's manual gives that set's heat limits, so read both before settling on a height. The flame effect alone puts out little warmth, and on most units the heater can be switched off while the flames stay on. Cables are where a bump-out earns its keep, since the box is hollow and they can drop inside it to a niche or a console. Ocoee sits on the west side of the Orlando area, between Orlando and Winter Garden.

Newer than the expressways

Most of Ocoee is newer than State Road 50 and the expressways, and many of its houses were finished without a fireplace to center a TV over.

Studs placed by the opening

Framing in a bump-out follows the fireplace opening and the corners, not a steady spacing, so it decides where the mount can land.

Two manuals before the height

The electric fireplace's manual gives the space it needs above it, and the TV's gives its heat limits. Read both before the height is set.

A hollow wall for the cables

A bump-out has room inside for cables to drop to a niche or a console, which the thin furring on an outside block wall lacks.

A customer beside a TV mounted above a fireplace at the holidays
TV mounted above a white fireplace mantel on a charcoal accent wall

Ocoee prices on accent walls and bump-outs

On a drywall or shiplap accent wall with no fireplace in it, a 55-inch TV on a tilting mount with the wires showing is $188. Drop the cables inside the framing, with a power outlet behind the screen, and that becomes $287. A wall built as a home theater often carries sound as well: a 65-inch TV on a fixed mount with a soundbar under it and the wires inside the wall comes to $392 with your help lifting.

Stone veneer changes one line. On a veneer face, a 65-inch TV on a full-motion mount with the wires showing is $303 with your help lifting, the $59 hard-wall line included. Over the electric fireplace in a drywall bump-out, mounting adds $49, the same as above any fireplace, so a 65-inch TV on a tilting mount there is $273 with your help lifting and the wires showing. Running the wires inside the box to an outlet behind the screen uses the $149 fireplace line and brings the total to $422. You can check each figure against the prices page.

TV mounted above a white mantel and a linear fireplace, seen from the side

Before the bump-out is framed

If the bump-out is still a plan, a few choices made before the drywall goes up make the TV easier to hang. Ask whoever frames it for solid wood backing across the area where the TV will go, so the mount can sit anywhere along it instead of wherever two studs fall. Set the fireplace low enough that, with the clearance from its manual, the TV can still hang near the eye level of someone on the sofa. Keep any mantel shelf slim and any niches out of the mount's footprint.

Framing the box and wiring for the fireplace are work for a builder and an electrician, and nothing on our price list covers them. Once the wall is finished, mounting the TV and handling its cables is our part. The wire concealment page explains the cover and in-wall options for the cables.

Recent jobs

Photos from recent TV Mount Lux jobs.

What happens next

1. Pick your setup

Tap the size, mount, wall and wires at the top of this page. Each answer shows its price.

2. Get the total by text

Leave your number for the exact total and the first open time.

3. We mount it

The height is marked with you, then the TV goes up level, with the wires done your way.

4. Guaranteed for a year

Load-tested before the technician leaves, with the labor guaranteed for 12 months.

Ocoee bump-out and accent wall questions

Electric fireplaces, faces, framing and block.

Can a TV go above the electric fireplace in my Ocoee bump-out?

Usually, once two things check out. The mount has to bolt into the bump-out's framing or into wood backing, and the gap between the fireplace and the TV has to meet what the fireplace's manual asks for. Mounting above it adds $49, as it does over any fireplace, and a photo of the whole wall with your screen size gets you the total.

Does stone veneer on an Ocoee accent wall cost more than shiplap?

Yes, by one line. Stone veneer and tile are hard walls, which take a hammer drill and masonry anchors at $59 per TV, while shiplap, wood slats and plain drywall carry no wall charge. More on hard walls is on the brick and stone page.

My Ocoee bump-out is built against an outside block wall. Is that the $59 line?

Not if the mount bolts to the bump-out's own framing. The hard-wall line applies when anchors go into the block itself, or when the bump-out has a stone or tile face. A photo from the side, showing how far the box stands off the wall, helps the technician tell which it is.

Do you build bump-outs or install electric fireplaces in Ocoee?

No. We mount TVs, and nothing is for sale except the mounts on the price list. A builder frames the bump-out and an electrician handles any wiring for the fireplace. Once the wall is done, the TV goes up with the studs found, a level, a load test of the mount and the cables tidied.

Text a photo Call (404) 448-1471

Text a photo of your wall

Point your phone's camera here to start a text to (404) 448-1471. Add a photo of the wall and your TV's size, and we reply with your price.

QR code that starts a text message to (404) 448-1471
Use the request form instead